Universal Milling Machine 01 – Die Work -Teeth Cutting – Key Way – Slotting – Rack Cutting – College Training Purpose – Model M1

Universal Gear Head Milling Machine
 – Universal Gear Head: Our milling machine is a universal gear head machine. But with the help of a vertical head, we can do the job vertically as well.

 – One feed Automatic: Our milling machine is one feed automatic. One axis can move automatically. As per the customer’s requirement, we can also customize with 2 feed automatic at extra cost.

 – Use of our Milling Machine: Our milling machine is more famous in Automobiles, Die making, Submersible pumps, small workshops, fabricators, etc.

 – Operations can do on our Milling Machine : 

• Die Work
• Teeth Cutting
• Facing
• Sleeting Slow
• Key Cutting
• Slotting
• Rack Cutting
• 45 degree Cutter
• Change gear teeth like Bike Gear, Car Gear

Jack Screw

• Universal Table is attached with Jack Screw. It helps us to move the table from the upper side to the downside.
• It can work up to 200-250 kg heavy job without any vibration.
• This jack Screw is fully rust protected. The nut of this screw is made with SG Iron casting.
• The size of the Jack Screw is 45 mm thickness made with EN-8 material.

Table Size

• The table size of our milling machine is 1050 x 250 mm.
• We can use a working surface up to 600 mm. As per customers’ requirements.
• we can also customize and made up to 1200 x 250 mm with extra cost.
• We can put a job with around 300 to 400 kg. on this table size.

Milling Gear Box (Feed Gear Box)
Milling Gear Box is an important component of milling machine because We constantly use auto-feed mechanism full day.

• We have used all the gears with EN-9 Material and with 45-50 Hardness without an oil bath.
• We have 2 options for self-drive.
• Feed Gear Box are attached with machine.
• We can cut the job up to 75 mm in M.S. Material with Carbide Cutter.
• Spline Shaft with 32 mm thickness/ 6 keyway for long-lasting and better performance.
• All steel gears are made with EN-8 Material so it ensures long life and protects them from wear out.
• Generally, 7 ltrs C Type of oils stay in Chamber. Splash lubricating system directly increase the life of gears and machine.

.

• Our Vertical Head is made with bevel gears.
• ISO-40 Spindle with hardened and ground.

• Our Bed is a flat type Bed.
• We give a self-lubrication system to lubricate oil.
• Seasoning Hardness in Bed.

We are doing the Seasoning Process. It helps to maintain accuracy against climate change.

• We assure you that our Milling Machine’s weight is almost 150 kg. More than other milling machines.
• Machine weight, wall thickness & wideness of base is important but the customer is more conscious about the cutting capacity of the machine.
• Maximum depth: 5-inch x 10 mm side & face cutter can cut 8 mm depth in one shot in M.S. material.
• Maximum depth with Vertical Head: 5-inch face cutter can cut 6 mm depth in a single shot in M.S. material.