|Fully heavy duty welded structure torsion free construction.
|Cutting head up-down movement guided in Vertical pair of “HIWIN” Germeny linear Motion bearing
|for jerk free movement.
|Infinitely variable pressure controlled cutting feed & upward return rapid movement by hydraulic
|Quick approach of cutting head upto the bar before cutting starts to enhance productivity by
|pushing rapid Button.
|Coolant tank with 100 Ltr. capacity and powered with electric coolant pump.
|Adjustable titanium carbide face blade guides with ball bearings at both side of cutting bar
|Hydraulically operated main vice with double acting full stroke cylinder
|Automatic return of cutting head much above the bar after cutting to safe height to save blade
|damage by bar while indexing.
|Hydraulically controlled automatic feed regulation through a state of the pilot operated hydraulic
|valve to Optimize production and tool life.
|High pressure coolant jets through blade guide helps coolant to enter in to the bar through blade
|gullets to optimize productivity and tool life.
|Manual blade guide setting with the opening and closing of moving vice
|Cutting feed through infinitiely variable flow control valve with cutting pressure regulation, as per the
|Heavy duty/Warm reduction gear box for blade rotation to minimize polygon effect to enhance tool
|life, surface finish and minimize vibration during cutting.
|Heavy duty energy efficient electric motor directly coupled to the gear box to minimize belt slippage
|Control panel with necessary switch gear and step down transformer for control circuit
|Split vice: – Machine is designed to offer burr free cutting with the help of split vice were in raw
|material bar and Cut piece are clamped rigidly till the cutting head goes up after cutting which also
|avoid rubbing of blade.
|Stretching of blade through a Hydraulic operated or manual operated blade tension arrangement.
|Linear motion guide rail & bearings on vertical columns are lubricated through oil pump.
|Hydraulic power pack with sufficient oil tank capacity and necessary control elements is provided on
|Cutting feed and rapid reverse of cutting arm.