Sale

Boring Head

9,500

Size: 50 Rs.9500 & 75 Rs.14500

Micro Boring Head 10-80 mm

Body Día 50 mm

20 Micron Accuracy

Enquiry

Offset Boring Head

The offset boring is an attachment that fits the milling machine spindle and permits most drilled holes to have a better finish and greater diameter accuracy.  Offset boring  head are used to create large hole when tolerance do not allow for a drill bit or do not have a large enough drill or reamer.  A offset boring head can be used to enlarge hole, or adjust hole centerline in certain instances.

Safety:

Be sure all set screws are tight before operation. Be sure offset boring head has a clearance to fit into hole when boring.  Remove Allen wrench before turning the mill one.  Double check mill speed before operation.

OFFSET BORING HEAD AND TOOLS

Figure 1.  shows an offset boring head. Note that the boring bar can be adjusted at a right angle axis. This feature makes it possible to position the boring cutter accurately to bore holes of varying diameters.

 This adjustment is more convenient than adjusting the cutter in the boring bar holder or changing the boring bar. Another advantage of the offset boring head is the fact that graduated micrometer collar allows the tool to be moved accurately a specified amount usually in increments of (0.001) without the use of dial indicator or other measuring device.

MICRO BORING HEAD 10-80 MM

BODY DIA 50 MM

GRADUALION 15 MM

BORING HOLE 12 MM

MAX OFFSET 15 MM

BORING CAPACITY 10-80 MM