Interchangeable CNC Extended Point (Heavy Duty)

Original price was: ₹7,200.Current price is: ₹6,700.

Shank Taper

Ød mm ØD mm Ød1 mm ØD1 mm L1 mm L2 mm L mm


12 28 62





MT-4 14 32 68 31.267  54.5  65.0  102.5 
MT-5 16 38 87 44.399 65.0 80.5 129.5

Double Bearing Mechanism. Two Anti Friction Bearings. Made of Hardened and Ground High Carbon Steel. Hardened on Tip 55 to 62 HRC Hardened Centre Shaft with 60? point. Special Steel Housing. Single-row deep groove ball bearing and Taper Roller bearing to absorb combined radial and thrust loads

  • Three Portion is ground and Hardened
  • Case hardened no Crack no Bending
  • These Arbors are designed for applications where tampered and hardened  arbors can’t be used
  • The straight shank  portion  is  soft which can be machined  to  adopt
  • Consists of Three anti-friction Steel bearings.
  • One needle roller bearing, one thrust ball bearing, and one deep groove ball bearing.
  • Well-lubricated to protect against contaminants and coolants.
  • Hardened and Ground (60-62 HRC) Steel with a 60° tip angle.
  • Run out within .0002″ (.005 mm).
  • Bearings are Pre-loaded and pressed to avoid starting loads.

It is also called a Live Center, it is essential for between enters turning.

  • Essential For Shaft Turning
  • For Lengthy Jobs
  • Speedy & effective work
  • International standard
  • Optimum output
  • Quality tested