Electric Motor 2/3/5 HP Standard ISI

“Using the best company’s Electric motor you can save 3000/- of power yearly.”

The drive can start as often as we like, Speed can be also changed from 10% to 200% of 1400RPM, Run the motor to 100Hz for 2800RPM at constant power from 1400RPM. Use a final drive ratio that gives you the highest motor speed for the job on the lathe, then when reducing the speed there will be more torque available.  it also allows in step-less variable speed to maintain the tool contact velocity for the diameter and for keeping a good finishing.

• An electric motor is an electrical machine that converts electrical energy into mechanical energy. The reverse of this would be the conversion of mechanical energy into electrical energy and is done by an electric generator.

• In normal motoring mode, most electric motors operate through the interaction between an electric motor’s magnetic field and winding currents to generate force within the motor. In certain applications, such as in the transportation industry with traction motors, electric motors can operate in both motoring and generating or braking modes to also produce electrical energy from mechanical energy.

• General-purpose motors with highly standardized dimensions and characteristics provide convenient mechanical power for industrial use. The largest of electric motors are used for ship propulsion, pipeline compression, and pumped-storage applications with ratings reaching 100 megawatts. Electric motors may be classified by electric power source type, internal construction, application, type of motion output, and so on.

• Electric motors are used to produce linear or rotary force and should be distinguished from devices such as magnetic solenoids and loudspeakers that convert electricity into motion but do not generate usable mechanical powers, which are respectively referred to as actuators and transducers.

STANDARD
Performance Conforms to Is 325 and dimension according to IS 1231 & 2223.

FRAME
The motor is supplied in a robust, rugged cast iron frame with integral feet. On Request, we can supply a motor in the aluminum body up to 100 L frame.

RATINGS
All standard Three Phase Motors are continuously rated to comply with performance standards.

VOLTAGE AND FREQUENCY
Supply volts 415 ± 5% Three Phase Hz. ± 3%

ENCLOSURES
The motor has Ip-44 Protection as defined in IS: 4691. Motors can be supplied with IP -54 and IP-55 on request.

INSULATION
Motor supply with class B & F insulation as a standard feature. Also, supply H on request of the customer.

SHAFT
Made From high carbon steel to provide exceptional Strength & rigidity to minimize deflection.

ROTOR
The rotor is of high-pressure aluminum die-cast. Every rotor dynamically balanced. It makes motor low amplitudes of Vibration & Noise.

LUBRICATION
Bearings are adequately lubricated with lithium-based high temp up to 150 deg. All the motors are supplied with C3 ball bearing & fully charged with lithium base grease at the time of assembly.

PRODUCT DESCRIPTION:-

• 2 Horse Power

• Crompton Brand Powerful motor

• Weight: 25Kg

• ISI Marked Powerful Electric motor

• Cost-Effective

• High Durability

• Piece to Piece Replacement Guarantee

• High-Quality Bearings (5 yr Guarantee)

•  Highest motor speed for the job on the lathe

 

Accessory	Suitable Model	Price (Rs.)
El. Motor 2 HP Standard ISI[25 Kg]	34,35,40	9500
El. Motor 3 HP Standard ISI [32 Kg]	43	11500
El. Motor 5 HP Standard ISI [42 Kg]	50, 60	16000