How to remove loud noise in the lathe machine?

Machines are machines, one day they’ll definitely stop working but when a new machine or a mid-age machine gets any problem like occurring of a very unpleasant sound then the first thing which you should check is how your operator or the repairer has dealt with it.

मशीनें मशीन हैं, एक दिन वे निश्चित रूप से काम करना बंद कर देंगे, लेकिन जब एक नई मशीन या मध्यम आयु की मशीन को बहुत अप्रिय आवाज होने जैसी कोई समस्या आती है, तो सबसे पहले आपको जांचना चाहिए कि आपके ऑपरेटर या मरम्मत करने वाले ने कैसे निपटाया है इसके साथ।

Many times the operator or repairer loses the chuck nut and says that the machine has got backless.
कई बार ऑपरेटर या रिपेयर करने वाला चक नट खो देता है और कहता है कि मशीन बैकलेस हो गई है।

It is very often that in a new gearbox there is a gap between two gears which is necessary.
बहुत बार ऐसा होता है कि नए गियरबॉक्स में दो गियर के बीच गैप होता है जो आवश्यक है।

But while repairing they tell you that there is a backless in the gearbox and ask you for the unnecessary expenditure.

But they hide the real cause. They just adjust some keys and tighten the chuck nut and this makes you spend 4 times more than required.

To avoid these kinds of problems, lubricate your machine daily or tell your operator to lubricate the machine every 4 hours.

And to get better service and honest solutions for your Lathe machine connect with Banka machines.

And if you want a metal cutting machine with long life, contrasting colours and convenient features then Banka machines are the best option.