Pillar Drill Machine 19 MM

Pillar Drill Machine 16 mm Drill Machine Manufacturer In India
drilling machine stock of BANKA
Pillar Drill Machine 16 mm Drill Machine Manufacturer In India
drilling machine stock of BANKA

Pillar Drill Machine 19 MM

0 Review(s)
in stock

$382.20

Quick Overview

  • Drilling Capacity : 19 mm
  • Column Dia : 74 mm
  • Spindle Hole Taper : MT-2
  • Spindle Speeds : 86-3360 RPM
  • Spindle Nos. To table Dist. : 670 mm
  • Spindle Center To Pillar : 185 mm
  • Table Size : 300 mm
  • Motor : 1 HP
Enquiry

Separate us from others

saperate-feature

 

Essential Features :

goahed BODY rmp
 Gear Hardeness 45 HRC 350 Nm Spindle Torch 86-3360 RPM
powe saver (1)
VOICE
tursiteB
2 Amp At Maximum Load  Noise Level – 85 dB. Accuracy – As per IS Standard

 

Helps you to find your goal

Technical Specification
Drilling Capacity 19mm
Column Dia 74
Spindle Nos. To table Dist. 670
Spindle Nose to Best Dist 930
Spindle Center To Pillar Face 185
Table Travel 670
Spindle Hole Taper MT-2
Spindle Speeds (RPM * Steps) 86-3360*8
Table Size 300 mm
Base Size Machine Area 225 x 270
Overall Base size 290 x 460
Spindle Travel 150
Column Lenth 1200
Overall Hight with Fully 1510
V-Belt Section ( Size) A-43
Weight ( Approx) 90 kg
Motor 1 H.P
Spindle Dia 54 mm

Innovation with a Purpose


Quality
We maintain our drills quality by 4 stage inspection. as manufacturing process goes ahead each stage our inspector check all parameters. Though our metal drilling drill performance and accuracy are better than other industrial drill machine manufacturer. BANKA Pillar drills have auto feed drilling system with high-speed motor. We had fitted 2 Speed Motor in our drill, it runs from 40 – 2000 RPM spindle speed.
Our toolroom drill is manufactured as per Indian Standard Test by testing instruments like,

Straight Edge Meter:
A straightedge is a tool with an edge free-form curves or straight, used for transcribing straight lines. Straightedges are used in the automotive service and machining industry to check the flatness of machined mating surfaces of base as well as the drill arm. it should not be concave and convex.
True straightness can in some cases be checked by using a laser line level as an optical straightedge: it can illuminate an accurately straight line on a flat surface such as the edge of a plank or shelf. It effects in the production schedule, time schedule, time saving and increase the quality of our products.
Sound Level Decibel Meter:
As per the IS test our Tool drill head sound is measured by Decibel Meter and it should be up to 85 to 90 lbs. In every Drill Machine, it should be 85 lbs and our each Drill Machine noise level is under 85 lbs.

Dial Indicator Micrometers:
Dial Indicator Micrometers is used for precise measurement of components which are done on the Drill. It’s also used to measure the apparent diameter of celestial bodies or microscopic objects and used to check test the runout of the internal taper of spindle. As per IS Test each drill machine spindle internal taper near the spindle nose should be 0.02 mm and up to end of the spindle should be 0.03 mm.

Amperemeter:
It is used to measures the current in a circuit is to break the circuit open and insert an “ammeter” in line with the circuit so that all electrons flowing through the circuit also have to go through the meter. When an ammeter is placed in series with a circuit, it ideally drops no. voltage as current goes through Drill machine main motor.
BANKA is most popular for its quality and uniqueness of our services towards their customers. Our service engineers are highly trained and skilled to design BANKA products and to serve timely services. BANKA 38 Pillar Drill is generally designed low maintenance, time saving, suitable for reckless operation and heavy metal removal.
Our Deep Drilling machine is designed for drilling medium and large parts, as well as boring, counter boring, reaming, tapping and surfacing to done with different parts and different angles. Its arm is made from solid material casting and hardened & ground. We are using the gears hardened & ground for smooth running. All control levers are quick to operate and are properly guarded against accident.
Each machine is properly checked as per IS Test Chart by our experienced engineers through testing and inspection process before dispatch from our factory. We are also using the material as Indian Standard which is used while manufacturing.

HELP, When you need it the most

banka-engineer

 whybanka_servcie

Free Installation and start-up

BANKA provides free installation and free start up of machine. Our installation engineer visits customer premises and smoothly installs the machine. He will not just install the machine, he also advises and guides your operators so there is no chance of delay in your work. We assure that after installation of your machine, there will be no delay, you will start your work smoothly and without any delay.

 whybanka_aftersales

Free After sales Visits

After sales is one of the essential feature. BANKA put their best efforts toward After sales services. We are providing 2 after sales visit in one year. Our service engineer will visit customer premises and check the whole machine. You can get quick support for maintenance, spares, performance etc..

 whybanka_3years

3 Years Warranty

Most of the customers have confusions about Warranty of machines. BANKA always tries to serve better to his customers.We are providing 3 years warranty to our customers. We are providing free maintenance of any damaged parts within warranty period.

 Free Shipping

Free Shipping

Transportation is one of the crucial factors in India. BANKA provides Free transportation within India. So customers do not have to worry about cost of shipping and damages of machines during transport.

 whybanka_moneyback

Right To Return

One of the Exclusive and extraordinary feature of BANKA is 100% money back guarantee.Sometimes because of any reason customer decides to return machine. At that time we will not ask any single question. Customers can return our machine within 15 days after installation.Reverse Transport charges and FULL REFUND will be issued by us in 3 days as soon as returned machine reaches our premises in its best condition.

 Technical (1)

Technical support

BANKA always welcomes customer’s queries. We are maintaining Care & Repair Department.Our team always tries to solve customers technical queries as early as possible. So there is no chance of Production loss and delay.

 spareparts

Spares

One most advantage of BANKA is quick availability of Spares. BANKA provides a exploded view manual book with machines. When there is a need of replacements of any parts, customers have to go through a simple process:

  • Send Parts number or its photo.
  • Get price with payment gateway link.
  • You will get dispatch details same day.
 solution

Easy & Quick Solution

It is essential to solve customer’s complain as early as possible. BANKA always tries to solve customer’s queries and complaints quickly. For quick and easy solution of Complaint, BANKA uses modern and quick tools to solve complain like as You tube video,SKYPE, Live chat etc..

SKYPE ID :- ravimachine

 

Machine Installation is first & foremost step after purchasing machine from anywhere.If our machine is not installed by a right way, we can not run machine smoothly for long time, even we can not get 100% accuracy in our machine.High Vibration is also one reason for Improper Installation. One thing that we have to consider at the time of installation is Place. it is necessary to keep some space around machine. So operator can operates machine freely. If we have maintain space around machine then we can properly maintain the machine anytime.

Steps to Install Machine

  • Slinging of the machine and Installation
  • Cleaning Of machine
  • Leveling of Machine
  • Possible operational Difficulty and remedies
  • Lubrication in the machine
  • Daily oil

  Generally, people install machine by their own, but it should not be done. The machine should be installed by an expert only.

Why we prefer machine installation by our expert only?

 

  • We have seen maximum complaints in first 15 days with the new machine. Then we have decided to give it free to all our customers.
  • Our expert team has 30 years experience of installation in workshop machinery. They are having expensive instruments so your startup will be smooth.
  • It is an engineering, product so it should be installed by an expert only.
  • Our expert is just not installed the machine he will also provide training to your operators/Technician.
  • Yes, it is cost effective solution because our technician comes to you in scheduled tour.

 

Note: Our service engineer will visit your premises within 30 days after the machine delivery. Our machine is easy to install. we have given full details in our manual book. we can give installation guide over the phone If you insist. If something wrong happens we take full responsibility. So you can start your machine on your own.

Relax! We carry the load

free-delivery-truckk

Delivery is one essential factor which we have to consider at the time of purchasing machine.

The customer always wants fast and safe delivery of their machine. but it is not possible in all cases.

We all know transportation structure of India. Sometimes because of some problems, customer do not receive machine in safe conditions as well as not in fast. Sometimes we have to face the labor problem so, that can also delay over the normal schedule of delivery.

Generally, customer is so much far from supplier’s location. They do not know transporter’s nature and their work. So Customer should prefer responsibility towards supplier’s side.

 

Why people prefer delivery by us?

 

  • We have a good association here in Rajkot for the region wise transportation.
  • We are dealing with transporters in a routine so we knows very well about their nature, cost, performance etc..
  • Road transport is unstructured in India.
  • You may be not that much aware of genuine and proper transport.
  • If we suggest us the transporter and machine will damage at the time of delivery than we are responsible for placing a claim against transporter.
  • All the responsibility belongs to Banka, we will repair the machine or replace the same. It will save our time.
  • One important part is ‘how to sling the machine’. Our genuine transporter knew have to sling the machine safely.

Complete information by videos

 

video-banka

We are here to Help you

1) What will be the warranty Period of this Drill Machine?

A: 1) All Gear Auto feed Radial Drill Machine

2) Back Geared Fine feed Radial Drill Machine

3) Back Geared Auto feed Radial Drill Machine

4) All geared Fine Feed Radial Drill Machine

5) Back Geared Fine Feed Pillar Drill Machine

 

2) How many types are there in the Drill Machine?

 

A: 1) All Gear Auto feed Radial Drill Machine

2) Back Geared Fine feed Radial Drill Machine

3) Back Geared Auto feed Radial Drill Machine

4) All geared Fine Feed Radial Drill Machine

5) Back Geared Fine Feed Pillar Drill Machine

 

 

3) How many popular models are there in the Drill Machine?

A : 40 mm Cap. All geared Auto feed Radial Drill Machine

40 mm Cap. All geared Fine feed Radial Drill Machine
40 mm Cap. Back geared Fine Feed Radial Drill Machine

40 mm Cap. All geared Auto feed Pillar Drill Machine

40 mm Cap. Back geared Auto feed Radial Drill Machine

38 mm Cap. All geared Auto feed Radial Drill Machine

38 mm Cap. All geared auto feed Pillar Drill Machine

38 mm Cap. Back geared Fine feed Pillar Drill Machine

25 mm Cap. Back Geared Fine Feed Radial Drill Machine

25 mm Cap. Back Geared Fine Feed Pillar Drill machine

20 mm Cap. Back geared Pillar drill Machine

 

 

4) Which are the accessories I Should Buy with Drill Machine?

A : Key Less Dill Chuck

Electrical Motors

Keyless Drill Chuck & Arbor

Drill Chuck & Arbor

Coolant Pump with Coolant Tank

Multi Spindle Drilling

Tapping Attachment

 

 

5) What are the confusions raised in the mind of customer at the time of purchasing Drill Machine ?

A: 1) Drilling Capacity requirement

2) Which type of drill is required?

 

 

6) Do you accept Domestic LC ?

A: Yes, accept domestic LC for 60 days on credit. Generally our 75 % customers are purchasing Machine from us with 60 days Credit through a Simple Process of LC. When the Seller is Unknown or New to the Buyer, Letter of Credit is one good Alternative to do the Business with Such New Seller Because Buyer can Avoid Risk by such Letter. Letter of Credit is one Additional Benefit to the Buyer by which they can protect Loss against Goods and Finance Also.The buyer can build safeguards into the letter of credit, including inspection of the goods and quality control, and set production and delivery times.

Express ourselves with the world

banka-overseas

 

 

Our services engineers to help overseas customers

 

Our services engineers to help overseas customers

Mr. Motibhai Patil

Mr. Ashoksinh Zala

I am with BANKA since 40 years. I have a great experience in Lathe, Drill and other workshop Machines installation and repairing maintenance. I am always ready to solve your queries. You can contact me anytime. I am with BANKA since 12 years. I am expert in lathe machine,Drill Machine installation, training and other guidance. Get a warm welcome me regarding any technical or installation queries of lathe machines.

 

We can provide better shipment by our genuine agent with Affordable Price.

 

PRITISH SHIPPING AGENCY
Address 01, Eric Machardo House, Tank Pakhadi Road No.03, Sahar Village, Sahar, Andheri (East),Mumbai – 400 099.
Contact Details +91 22-64520785

+91 9870999416

Email pritish_shipping@yahoo.co.in

 

Agreed Origin Charges
THC charges Inr 850 per ton
Documentation fee Inr 2500 per set
Service tax At actual


Our international Bank Account Detail

Standard Chartered Bank
A/C Name M/S BANKA MACHINE
A/C Number 80605069512
Branch Address Simaria Mansion, Wockhardt Hospital, Princess High School, Kalawad Road, Rajkot-360 005
IFSC : SCBL0036064

 

We welcome any query regarding this product

question

Your Name *

Your Email

Your Mobile No. *

Your query *


Product Description

Pillar Drill Machine 19mm

  • Drilling Capacity : 19 mm
  • Column Dia : 74 mm
  • Spindle Hole Taper : MT-2
  • Spindle Speeds : 86-3360 RPM
  • Spindle Nos. To table Dist. : 670 mm
  • Spindle Center To Pillar : 185 mm
  • Table Size : 300 mm
  • Motor : 1 HP

Description

Quality
We maintain our drills quality by 4 stage inspection. as manufacturing process goes ahead each stage our inspector check all parameters. Though our metal drilling drill performance and accuracy are better than other industrial drill machine manufacturer. BANKA Pillar drills have auto feed drilling system with high-speed motor. We had fitted 2 Speed Motor in our drill, it runs from 40 – 2000 RPM spindle speed.
Our toolroom drill is manufactured as per Indian Standard Test by testing instruments like,

Straight Edge Meter:
A straightedge is a tool with an edge free-form curves or straight, used for transcribing straight lines. Straightedges are used in the automotive service and machining industry to check the flatness of machined mating surfaces of base as well as the drill arm. it should not be concave and convex.
True straightness can in some cases be checked by using a laser line level as an optical straightedge: it can illuminate an accurately straight line on a flat surface such as the edge of a plank or shelf. It effects in the production schedule, time schedule, time saving and increase the quality of our products.
Sound Level Decibel Meter:
As per the IS test our Tool drill head sound is measured by Decibel Meter and it should be up to 85 to 90 lbs. In every Drill Machine, it should be 85 lbs and our each Drill Machine noise level is under 85 lbs.

Pillar Drill Machine 19mm

Delivery is one essential factor which we have to consider at the time of purchasing machine.

The customer always wants fast and safe delivery of their machine. but it is not possible in all cases.

We all know transportation structure of India. Sometimes because of some problems, customer do not receive machine in safe conditions as well as not in fast. Sometimes we have to face the labor problem so, that can also delay over the normal schedule of delivery.

Generally, customer is so much far from supplier’s location. They do not know transporter’s nature and their work. So Customer should prefer responsibility towards supplier’s side.

Why people prefer delivery by us?

 

  • We have a good association here in Rajkot for the region wise transportation.
  • We are dealing with transporters in a routine so we knows very well about their nature, cost, performance etc..
  • Road transport is unstructured in India.
  • You may be not that much aware of genuine and proper transport.
  • If we suggest us the transporter and machine will damage at the time of delivery than we are responsible for placing a claim against transporter.
  • All the responsibility belongs to Banka, we will repair the machine or replace the same. It will save our time.
  • One important part is ‘how to sling the machine’. Our genuine transporter knew have to sling the machine safely.