Under Counter Lathe Machine


  • Under Counter Lathe Machine
  • Height Of Centre -225 mm
  • Swing Over Bed – 450 mm
  • Admin Between center – 500
  • Spindle Bore- 50 mm
  • Main Motor -2 hp
  • Weight Approx : 800 kg

Separate us from others

  • Bed is made from 25 Grade Cast iron of 400 BHN hardened, strictly inspected with Microlevel, Hardness Tester and Straight Edge.
  • Boring of Head Stock is done on WMW boring machine fitted with induction hardened and ground Spindle made from alloy steel.
  • Apron is totally enclosed oil bath system with lever type arrangement for automatic feeds.
  • Tail Stock with hardened and ground tail stock Spindle made from alloy steel having external and internal grinding.
  • Instruction Manual as per indian Standard IS – 1878 (part -I) 1993.
  • COLOUR OPTION :- Emerald Green / Blue & White (Two Tone)

Helps you to find your goal

Model CKE61100M CKE61100M CKE61100M
 Bed Type  2v & 2 Flat  2v & 2 Flat  2v & 2 Flat
 Bed Lenth  1350 mm  1850 mm  1850 mm
 Bed Width  275 mm  275 mm  275 mm
 Gap Length  125 mm  125 mm  125 mm
 Gap Length in front of face Plate  110 mm  110 mm  110 mm
 Height Of Centre  225 mm  225 mm  225 mm
 Swing Over Bed  450 mm  450 mm  450 mm
 Swing Over cross slide  225 mm  225 mm  225 mm
 Swimming Gap  520 mm  520 mm  520 mm
 Admin Between centre  500 mm  800 mm  1000 mm
 Movement of cross slide  225 mm  225 mm  225 mm
 Movement Of Compound slide  100 mm  100 mm  100 mm
 Spindle Nose (Threaded type)  75 mm  75 mm  75 mm
 taper Bore in spindle sleeve  MT – 4  MT – 4  MT – 4
 Spindle Bore  50 mm  50 mm  50 mm
 Quill Dia  50 mm  50 mm  50 mm
 Taper In quill  MT – 4  MT – 4  MT – 4
 Quill travel  170 mm  170 mm  170 mm
 No. of Spindle Speed  8  8  8
 Rpm Law  45-750  45-750  45-750
 Metric Thread  20(0.5to 7.5mm)  20(0.5to 7.5mm)  20(0.5to 7.5mm)
 English Thered  36(4 to 6 TPI)  36(4 to 6 TPI)  36(4 to 6 TPI)
 Lead Screw  32 mm x4 TPI  32 mm x4 TPI  32 mm x4 TPI
 Feed Shaft  25 mm  25 mm  25 mm
 Free Longitudianal cross feed  36(0.06 to 1 mm)  36(0.06 to 1 mm)  36(0.06 to 1 mm)
 Main Motor  1.5 kw / 2 HP  1.5 kw / 2 HP  1.5 kw / 2 HP
Motor Drive V Blet
 Weight Apporox  800 kg  900 kg  1000 kg
 Floor Space occupied  2400 x540 x1200  2400 x540 x1200  2400 x540 x1200

Innovation with a Purpose



Quality :
Our lathes quality is maintained because of our step by step manufacturing process. According to our manufacturing process, metal cutting lathe performance and accuracy are better than other industrial lathe machine manufacturer.

Our toolroom lathe is manufactured as per Indian Standard test by testing instruments like,

  • Straight Edge:

A straightedge is a tool with an edge free-form curves or straight, used for transcribing straight lines. Straightedges are used in the automotive service and machining industry to check the flatness of machined mating surfaces and concave & convex.

True straightness can in some cases be checked by using a laser line level as an optical straightedge: it can illuminate an accurately straight line on a flat surface such as the edge of a plank or shelf. It effects in the production schedule, time schedule, time saving and increase the quality of our products.

  • Spirit Level Precision:

Generally, an engineer’s spirit level is used to level machines, although they may be used to level large workpieces on machines such as planers. Spirit levels are also used in building construction by carpenters and masons.

A precision level is used to check the installation of precision machines in two axes. A lathe is manufactured with its base in a level plane. Small milling machines are often roughly leveled but large mills are installed level. Periodically check the level to ensure contained lathe accuracy by using Spirit Level accuracy of 0.05 mm/mt. According to IS Test Chart machine must be accurately leveled up to 0.02 mm per meter.

  • Hardness Tester BHN Scale:

Hardness measurements quantify the resistance of a material to plastic deformation. hardness tests compose the majority of processes used to determine material hardness, and can be divided into two classes: macro-indentation and micro-indentation tests. It’s used to test the hardness of the bed. Our each lathe machine’s hardness of the bed is 400 BHN as per IS test.

The main advantages of the hardness test are that extremely accurate readings can be taken, and just one type of indenter is used for all types of metals and surface treatments.

  • Tachometer RPM MPM:

Tachometer RPM Meter is an instrument measuring the rotation speed of a shaft or disk, as in a lathe machine, drill machine, milling machine and other machinery. The tachometer is used to accurately measure spindle RPM (Speed) of the lathe machines. Just attach a reflective sticker to the rotating part and point the red laser beam on the mark from a safe distance.

  • Sound Level Decibel Meter:

As per the IS test our Tool lathe head sound is measured by Decibel Meter and it should be up to 85 to 90 dB. In every lathe machine, it should be 85 dB and our each lathe machine noise level is under 85 dB.

  • Dial Indicator Micrometers:

Dial Indicator Micrometers is used for precise measurement of components which are done on the lathe. It’s also used to measure the apparent diameter of celestial bodies or microscopic objects.

  • Screw Thread Special Tester:

With Screw thread tester we can test the Pitch accuracy  test. One end of the tester, a dial gauge has attached and the other end a point has attached which measures screw thread.

  • Spindle Torque:

The simplest form of torque wrench consists of a long lever arm between the handle and the wrench head, made of a material which bends elastically in response to applied torque. The mechanical indicator is connected to the head of the lathe machine. Whichmeasures the torque of the machine’s spindle.

  • Amperemeter:

It is used to measures the current in a circuit is to break the circuit open and insert an “ammeter” in line with the circuit so that all electrons flowing through the circuit also have to go through the meter. When an ammeter is placed in series with a circuit, itideally drops no voltage as current goes through Lathe machine main motor.

Banka lathe is the best premium quality lathe, drill, mini lathe, milling machine manufacturer in indiaIndia. Our future depends on the dedication of individuals, to achieve one of the top charitable all gear lathe manufacturers  in the whole world.

Precision lathe machine quality demands are a must in all aspects of component manufacturing. It requires a range of processing expertise, technologies, and application to provide consolidated results to users. Innovative solutions  & approaches provide the edge to have technological advancements and necessary pace in tomorrow’s world. The lathe machines are prepared by expertise technical engineers.

System of Making :
We are using a software for making designs, patterns, and drawings, according to that we give job works at outsources. We are not manufacturing any parts on our floor because it disturbs our manufacturing schedule and wasting our time. We assembled all the assembly parts and sub-assembly parts on our floor if there any rejection in any parts that we never compromise in our quality.

In next stage when all assembly and all sub-assembly were assembled our quality control department will inspect the same, who areexpertized and skilled with years of experiences. Quality control team strictly inspect all the parts with its material, tolerance, and reference as per drawings and inspection reports.

We are using the material with 20MnCr5 or SAE 8620  grade casting in Gear, Lock Nut, Spindle which was passed through fromHardening process in pit type gas carburizing furnance with PID Controller. Machine’s Headstock has bored in WMW Boring machine and bed also passed on with flame hardening process up to 400 BHN. WMW planning machine used to make a rough cut in machine bed and after this process, it will go for finishing the process. In next step bed will pass on grinding process by METISAN USA make surface grinding machine.

Maintenance Schedule :
Our service engineers are working continuously as per their planned schedule of installation and service for your lathe machines. The main principle of maintenance schedule is to provide customer timely service and to reduce the breakdowns. We are providing service according to your usage and criticality of your lathe machine. The customer can get the benefit of free of cost maintenance and less timing consuming.

Our long experience of the machine tools business and working with thousands of machines enables our highly skilled and experienced service engineers are always ready to serve the service for their customer any time.

Lead us to serve more


No Images Accessories Description
1 01-lathe-Machine-Price Quick Change Tool Post Tool changing achieved in spilt second and make a number of extra operations possible with pre-set tools and special accessories. Guaranteed tool positioning accuracy within 0.02 mm.
2 02-Lathe-Machine-Price Centre Adopter Use to hold SS Dead Centre during turning of Between centre.
3 03-Lathe-Machine-Price Dead Centre Use when turning of Between Centre job.
4 04-Lathe-Machine-Price Change Gears The operator has to change gears often while making threads as per mentioned in thread chart.
5 05-Lathe-Machine-Price V-Belt Useful to drive motor pulley and main pulley.
6  06-Lathe-Machine-Price Allen Key Set Useful tools when maintenance required.
7 07-Lathe-Machine-Price Spanner Set with Oil Can Tools used for maintenance and operating machine.
8  08-Lathe-Machine-Price Vibration Dumping Pad It was made from rubber material and fitted on machine base.Use for anti- vibration when machine in running mode and increases the machine’s cutting capacity.
9  09-Lathe-Machine-Price Foundation Bolt Use to clutch the machine in self-position at the time of operation and maintenance.
10  10-Lathe-Machine-Price Manual Book All details are provides in this book like installation, maintenance,training and parts.
11  11-Lathe-Machine-Price L Clamp It’s useful in foundation to support the legs.
12  12-Lathe-Machine-Price Color Brush A tool to paint the machine or any other tools to repair while parts are damaged in transportation.
13 13-Lathe-Machine-Price Industrial Apron Apron wear for safety and keep the small tools in that while operating machines.
14 14-Lathe-Machine-Price Oil Funnel A tool for filling and filtering the oil which is essential for machine.
15  15-Lathe-Machine-Price Safety Glasses To protect eyes while operating machines.
16 16-Lathe-Machine-Price Slinging Belt For the safety of machines while loading and unloading the machine.
17  17-Lathe-Machine-Price Tools Bag To save all the small and big tools needed to operate machine.
18  18-Lathe-Machine-Price Machine Lamp Improve operator vision Fits oncarriage,moves, Parallel withcarriage, Essential While Bore Cutting.
19 19-Lathe-Machine-Price

Carriage Stopper 4 Way [2 Kg]

Carriage Stopper 4 Way [3 Kg]

– Linear Stopper

– Stops carriage at 3 Statio

We are here to Help you


Q1: What will be the warranty Period of this Lathe Machine?

A: We are providing 3 years warranty in our products. If there any parts damaged in your machine than we also provides free parts service in warranty period by fastest courier service.


Q2: What is the weight of This Lathe?

A: Our this machine is most popular product. Weight of this machine is approx 800 kgs.


Q3: Which accessories should I buy with this Lathe Machine ?

A: As we suggest which accessories are necessary in Banka 34 lathe machine.

  • ISI Electric Motor – if we use ISI mark motor instead of normal one, will save rs. 3000/- yearly.
  • True Chuck – also known as salf centring chuck, to make proper gip for the round type jobs.
  • Dog Chuck – also known as independent chuck, it’s useful to hold thesquare type jobs.
  • Chuck Plate – to mount a chuck on a spindle, it’s fitted on the back side of the chuck.
  • Steady Rest – to protect the job from over hanging while lengthy job turning.
  • Follow Rest – to reduce cutting thrust while between center lengthy job turning.
  • Coolant Pump – to improve tooling life and reduce job heating while heavy metal cutting.
  • Revolving Centre – it also called a live centre, it is essential for between centers turning.


Q4: Do you accept Domestic LC ?

A: Yes, accept domestic LC for 60 days on credit. Generally our 75 % customers are purchasing Machine from us with 60 days Credit through a Simple Process of LC. When the Seller is Unknown or New to the Buyer, Letter of Credit is one good alternative to do the Business with Such New Seller Because Buyer can avoid risk by such Letter. Letter of Credit is one Additional Benefit to the Buyer by which they can protect Loss against goods and finance Also.The buyer can build safeguards into the letter of credit, including inspection of the goods and quality control, and set production and delivery times.

Q5:What is the difference between simple lathe machine and Under Counter Lathe Machine ?

A:Generally in simple lathe Machine, Motor Pulley counter is visible, means we can see the counter and pulley. While Under counter lathe name itself suggest that motor pulley counter is under side. We can not see it and it is fully safe. There is no chance of accident in under Counter Lathe Machine