Radial Drill 40mm – Fine Feed- Hole Diameter Up To 40 mm – MS Drill 40 mm – CI 45 mm – High Speed RPM Drill – Rajkot Gujarat Drill – Medium Duty – Model R40
₹ 1,45,000
- Drilling in M.S: 40
- Drilling in C.I: 45
- Tapping in M.S: 20
- Rough Boring in M.S: 75
- Spindle Hole Taper: MT-4
- Spindle Travel: 250
- Spindle Speeds (RPM x steps) : 88-2600 x B
- Diameter of RAM: 78
- Spindle Autofeed Ranges : 0.05 & 0.09
- Max/Min Dist. Spindle nose to the base: 850 / 250
- Max/Min Dist. Spindle Center to Column: 920 / 385
- Max. Drilling Radius: 1005
- Machine Measurement (L X B X H) : 1350 x 850 x 1825
Separate us from others
Essential Features :
![]() |
![]() |
![]() |
---|---|---|
Gear Hardeness 45 HRC | 350 Nm Spindle Torch | 88-2600 RPM |
![]() |
|
![]() |
2 Amp At Maximum Load | Noise Level – 85 dB. | Accuracy – As per IS Standard |
Salient Features :
– Oil bath Lifting Assembly
– Steel worm supported through ball bearing at both sides
– Screw supported through taper roller bearings
– Wide supports of column, column bracket & arm
– Heavy duty lifting screw of 35 dia.
– Long bottom for greater rigidity to reduce vibration
– Heavy duty column with Heavily ribbed base plate
– 250 mm long spindle travel
– 78 mm steel RAM with 2.5 module Heavy Teeth
– Greater Support through closed V-Guideways and wider drilling head
– Better design of arm for higher rigidity and wide support
![]() |
Oil Bath Lifting Assembly:
|
![]() |
Bracket Arm:
|
![]() |
Column Base :
|
![]() |
Spindle Travel :
|
![]() |
Drilling Head :
|
![]() |
Arm :
|
![]() |
Four Side Useful Box Table :
|
Helps you to find your goal
Description | R40 Back Geared |
Drilling in M.S | 40 |
Drilling in C.I | 45 |
Tapping in M.S | 20 |
Rough Boring in M.S | 75 |
Spindle Hole Taper | MT-4 |
Spindle Travel | 250 |
Spindle Speeds (RPM x steps) | 88-2600 x 8 |
Diameter of RAM | 78 |
Spindle Autofeed Ranges | 0.05 & 0.09 |
Max/Min Dist. Spindle nose to base | 850 / 250 |
Max/Min Dist. Spindle Center to Column | 905 / 385 |
Max. Drilling Radius | 990 |
Machine Measurement (L X B X H) | 1350 x 850 x 1825 |
Diameter of Column | 170 |
Work Table | 300 x 300 x 385 |
Drill-head Motor | 1.5 HP / 960 RPM |
Elevating Motor | 1 HP / 1440 RPM |
Head Motor V-belt | B-47 |
Lifting Motor V-belt | B-23 / B-24 |
Innovation with a Purpose
– Oil bath Lifting Assembly
– Steel worm supported through ball bearing at both sides
– Screw supported through taper roller bearings
– Wide supports of column, column bracket & arm
– Heavy duty lifting screw of 35 dia.
– Long bottom for greater rigidity to reduce vibration
– Heavy duty column with Heavily ribbed base plate
– 250 mm long spindle travel
– 78 mm steel RAM with 2.5 module Heavy Teeth
– Greater Support through closed V-Guideways and wider drilling head
– Better design of arm for higher rigidity and wide support
Quality
We maintain our drills quality by 4 stage inspection. as manufacturing process goes ahead each stage our inspector check all parameters. Though our metal drilling drill performance and accuracy are better than other industrial drill machine manufacturer. BANKA Pillar drills have auto feed drilling system with high-speed motor. We had fitted 2 Speed Motor in our drill, it runs from 40 – 2000 RPM spindle speed.
Our toolroom drill is manufactured as per Indian Standard Test by testing instruments like,
Straight Edge Meter:
A straightedge is a tool with an edge free-form curves or straight, used for transcribing straight lines. Straightedges are used in the automotive service and machining industry to check the flatness of machined mating surfaces of base as well as the drill arm. it should not be concave and convex.
True straightness can in some cases be checked by using a laser line level as an optical straightedge: it can illuminate an accurately straight line on a flat surface such as the edge of a plank or shelf. It effects in the production schedule, time schedule, time saving and increase the quality of our products.
Sound Level Decibel Meter:
As per the IS test our Tool drill head sound is measured by Decibel Meter and it should be up to 85 to 90 lbs. In every Drill Machine, it should be 85 lbs and our each Drill Machine noise level is under 85 lbs.
Dial Indicator Micrometers:
Dial Indicator Micrometers is used for precise measurement of components which are done on the Drill. It’s also used to measure the apparent diameter of celestial bodies or microscopic objects and used to check test the runout of the internal taper of spindle. As per IS Test each drill machine spindle internal taper near the spindle nose should be 0.02 mm and up to end of the spindle should be 0.03 mm.
Amperemeter:
It is used to measures the current in a circuit is to break the circuit open and insert an “ammeter” in line with the circuit so that all electrons flowing through the circuit also have to go through the meter. When an ammeter is placed in series with a circuit, it ideally drops no. voltage as current goes through Drill machine main motor.
BANKA is most popular for its quality and uniqueness of our services towards their customers. Our service engineers are highly trained and skilled to design BANKA products and to serve timely services. BANKA 38 Pillar Drill is generally designed low maintenance, time saving, suitable for reckless operation and heavy metal removal.
Our Deep Drilling machine is designed for drilling medium and large parts, as well as boring, counter boring, reaming, tapping and surfacing to done with different parts and different angles. Its arm is made from solid material casting and hardened & ground. We are using the gears hardened & ground for smooth running. All control levers are quick to operate and are properly guarded against accident.
Each machine is properly checked as per IS Test Chart by our experienced engineers through testing and inspection process before dispatch from our factory. We are also using the material as Indian Standard which is used while manufacturing.
Lead us to serve more
Standard Accessories :
- Motor pulley
Extra Accessories :
- Electric Motors
- Drill chuck & Arbor
- Key less Drill chuck & arbor
- Extra Long Column
- “V” Belts
- Work Table
- Coolant pump with coolant tank
- Tapping Control Panel Board
- Taping attachment ( Mechanical )
We are here to Help you
1) What will be the warranty Period of this Drill Machine?
A: 1) All Gear Auto feed Radial Drill Machine
2) Back Geared Fine feed Radial Drill Machine
3) Back Geared Auto feed Radial Drill Machine
4) All geared Fine Feed Radial Drill Machine
5) Back Geared Fine Feed Pillar Drill Machine
2) How many types are there in the Drill Machine?
A: 1) All Gear Auto feed Radial Drill Machine
2) Back Geared Fine feed Radial Drill Machine
3) Back Geared Auto feed Radial Drill Machine
4) All geared Fine Feed Radial Drill Machine
5) Back Geared Fine Feed Pillar Drill Machine
3) How many popular models are there in the Drill Machine?
A : 40 mm Cap. All geared Auto feed Radial Drill Machine
40 mm Cap. All geared Fine feed Radial Drill Machine
40 mm Cap. Back geared Fine Feed Radial Drill Machine
40 mm Cap. All geared Auto feed Pillar Drill Machine
40 mm Cap. Back geared Auto feed Radial Drill Machine
38 mm Cap. All geared Auto feed Radial Drill Machine
38 mm Cap. All geared auto feed Pillar Drill Machine
38 mm Cap. Back geared Fine feed Pillar Drill Machine
25 mm Cap. Back Geared Fine Feed Radial Drill Machine
25 mm Cap. Back Geared Fine Feed Pillar Drill machine
20 mm Cap. Back geared Pillar drill Machine
4) Which are the accessories I Should Buy with Drill Machine?
A : Key Less Dill Chuck
Electrical Motors
Keyless Drill Chuck & Arbor
Drill Chuck & Arbor
Coolant Pump with Coolant Tank
Multi Spindle Drilling
Tapping Attachment
5) What are the confusions raised in the mind of customer at the time of purchasing Drill Machine ?
A: 1) Drilling Capacity requirement
2) Which type of drill is required?
6) Do you accept Domestic LC ?
A: Yes, accept domestic LC for 60 days on credit. Generally our 75 % customers are purchasing Machine from us with 60 days Credit through a Simple Process of LC. When the Seller is Unknown or New to the Buyer, Letter of Credit is one good Alternative to do the Business with Such New Seller Because Buyer can Avoid Risk by such Letter. Letter of Credit is one Additional Benefit to the Buyer by which they can protect Loss against Goods and Finance Also.The buyer can build safeguards into the letter of credit, including inspection of the goods and quality control, and set production and delivery times.