,

Center Less Grinder – Grinding Range 2 to 50 mm – Small Job Center Grinding – Use For Auto Parts, Bolt, Forging Unit, Round Job Materials – Model BCG 50 mm

 1,79,000

  • Centre Height – 143 mm
  • Swing over bed- 286 mm
  • Swing over Cross Slide – 145mm
  • Spindle Bore Dia – 34 mm
  • Collet Capacity- 32 mm
  • Gross Weight Approx : 750 Kgs.
Enquiry

Separate us from others

Salient Features :

  • Semi Automatic
  • Suitable for batch production or small lot production
  • More productive for quick engagement and overlapped functioning of the tools in addition to faster mounting and feeding of the job and rapid speed change
  • Enable repetitive production of same job requiring less involvement, effort and attention of the operator for Presetting of work speed and feed rate and length of travel of the cutting tools
  • Possesses an axially movable indexable turret in place of tail stock

Separate us from others

Salient Features :

  • Semi Automatic
  • Suitable for batch production or small lot production
  • More productive for quick engagement and overlapped functioning of the tools in addition to faster mounting and feeding of the job and rapid speed change
  • Enable repetitive production of same job requiring less involvement, effort and attention of the operator for Presetting of work speed and feed rate and length of travel of the cutting tools
  • Possesses an axially movable indexable turret in place of tail stock

Innovation with a Purpose

innovation

  • Semi Automatic
  • Suitable for batch production or small lot production
  • More productive for quick engagement and overlapped functioning of the tools in addition to faster mounting and feeding of the job and rapid  speed change
  • Enable repetitive production of same job requiring less involvement, effort and attention of the operator for Presetting  of work speed and feed rate and length of travel of the cutting tools
  • Possesses an axially movable index able turret in place of tail stock

Lead us to serve more

  • 2 H.P. Two speed Ele. Motor.
  • Penal Board with Relay, Connector, Push Button, S/F Switch, R/F Switch.
  • Coolant Pump with Flexible Pipe.
  • Bar feed Attachment.
  • Vertical Slide.
  • One Nos. Stopper Holder
  • One Nos Turning Holder
  • One Nos. Blank Holder
  • One Nos. Drill Holder
  • One Nos. Collet.
  • Spanner for Spindle Nut.
  • Turret Stopper Bolt Key.

We are here to Help you

1) What is Capstan Lathe Machine?

A:- A capstan lathe or a turret lathe is a production lathe used to manufacture any number of identical pieces in the minimum time. These lathes are development of engine lathes. The capstan lathe was first developed in the United States of America by Pratt and Whitney sometimes in 1860.Special characteristics of a capstan or turret lathe enable it to perform a series of operations such as drilling, turning, boring, thread cutting,reaming, chamfering, cutting- off and many other operations in a regular sequence to produce a large number of identical pieces in a minimum time.

 

2) What are the basic features of Capstan Lathe Machine?

A: The features of the Capstan Lathe Machine are as follows :

  • Semi Automatic
  • Suitable for batch production or small lot production
  • More productive for quick engagement and overlapped functioning of the tools in addition to faster mounting and feeding of the job and rapid speed change.
  • Enable repetitive production of same job requiring less involvement, effort and attention of the operator for Presetting of work speed and feed rate and length of travel of the cutting tools.
  • Possesses an axially movable index able turret in place of tail stock

 

3) What will be the warranty Period of this Lathe Machine?

A: We are providing 3 years warranty in our products. If there any parts damaged in your machine than we also provides free parts service in warranty period by fastest courier service.

 

4) Do you accept Domestic LC ?

A: Yes, accept domestic LC for 60 days on credit. Generally our 75 % customers are purchasing Machine from us with 60 days Credit through a Simple Process of LC. When the Seller is Unknown or New to the Buyer, Letter of Credit is one good Alternative to do the Business with Such New Seller Because Buyer can Avoid Risk by such Letter. Letter of Credit is one Additional Benefit to the Buyer by which they can protect Loss against Goods and Finance Also.The buyer can build safeguards into the letter of credit, including inspection of the goods and quality control, and set production and delivery times.