Bandsaw Cutting Machine – Metal Cutting Machine – Pipe And Rod Cutting – High Speed Tube – Solid Steel – Model B75

A drive gear is the major components of every Band Saw Machine. Machine life depends on gearbox which we have used. We have used India’s top brand Gears in our machine.

Elecon Gear box proves the concept of “Fit & Forget”. We do not need to change this gear for around 15 years.

We assure that our Heavy-Duty Bandsaw Machine’s weight is almost 150 kg more than other bandsaw machines.

Why we assure for such weight?

We put almost double support in all the main part of our machine like .

• Support in Blade
• Support in Bed/Base
• Support in Up down of machine

– Because of such supports our machine is a heavy weight than other manufacturers.

• Our Bandsaw Machine was made with a rigid plate construction.
• Generally,Manufacturers are using 16 gauge sheet instead of a plate. But we have used 3.15 mm plate in our machine so there is no worry for bending the plate.
• Use of such plate prevents machine from the crack.

Heavy thickness structure / Box type Structure:-

BANKA – With Box type Structure	Others – Without Box Type Structure

• Our machine is framed and designed with box type structure.
• Box type structure made the machine more rigid (almost double) than another machine.

• We have used Titanium Carbide Blade in our Bandsaw Machine.
• Because of this blade, all the large job can run without any friction and defects.
• One of the features of this blade is that it never heats so it can cut any hard material like SS.
• Even we have used Rubber Steel Roller Bearing so there is no need to change the blade for a long time.

Hinge type Bandsaw machines are such type of machine in which machine will up down from one side instead of two sides.

Benefits of Hinge type Bandsaw Machine:

• In double column bandsaw machine, we have up down machine from both the side. So when we need to cut the small jobs, it creates a problem. We have to continuously up down the machine because small jobs cut fastly. Ultimately it consumes more times.
• While in this hinge type bandsaw machine we have to up down machine from one side only so it is easier for the operator in small size job cutting.

UC Critical Bearing Alignment:

• We have used self-alignment pramor block bearing in our machine.
• As there is an auto alignment option, it prevents the machine from misalignment.
• Because of this option, machine up-down works smoothly and without any hurdles.

• Mass production and high accuracy depend on the effectiveness of hydraulic cylinder, hydraulic pressure.
• Life of Blade also depends on the hydraulic pressure of the machine.
• We have used Horn tube in our hydraulic system, which is not given by other manufacturers.

What is the benefit of Horn tube in Hydraulic System?

• Horn tube is a major part of a hydraulic system which is filled with oil for high lubrication. It consistently gives pressure.
• With the help of horn tube, job cutting will be same from top to bottom.
• There is no any chance of variation and defects in the job. You will get same cutting.

Our Bandsaw Machine was fitted with extra heavy duty self-centring vice.
Why is our Self Centering Vice three times better than other manufacturers?

SG Iron Casting (Ductile Cast Iron) :

Sometimes when we are cutting job like gear, crank, fork, etc. at that time, there are some chances to crack the vice. But our self-centering vice made with SG iron cast material. There is no chance of cracking.

38mm hard chrome column plate with EN-8 material:

We are using 38 mm hard chrome column plate with EN-8 Material in a self-centering vice.

Why does it need to chrome?

• Because Coolant water continuously falls to this plate. So to protect from such water we need to chrome it.
• Hard chroming also increases load carrying capacity and reduce the chance to wear.

29 Degree acme thread with hard chrome:

We use 29-degree acme thread with hard chrome for vice. So it prevents from coolant water flow and increases loading capacity while we are cutting job like fork, gears, etc.

Reduce Wastages:

Most bandsaw machine cuts it’s last job around 100-150 mm long and remains unusual.So remaining material becomes wastage, but because of such big self-centering vice, we can cut last job till 25 mm. We can utilise the material optimally.

• We are fitting coolant pump inbuilt in our machine.
• The pump attached to body itself.
• It protects and saves our machine structure from used and wastewater.
• One major benefit of our coolant pump is that there is no chance to leakage water.

• We are using v-grooved (A-type) and dynamically balanced electricals which directly increase the life of motor and electricals. It also maintains balance in the machine.
• We have given an option of the 3-speed pulley in our machine so the user can operate it at three different steps.

Why is 3-speed pulley important?

• It is not possible that we have to cut same material and same diameter job every – time.
• Sometimes we need to cut hard material like SS with different dia. Like 50 mm, 100 mm. Proper speed is essential for blade life.
• Speed can be varied for efficient working as per the weight and size of the job, material type of the job.
• Our machine is very famous to cut hard metal.

Auto stop:

•  With the help of Auto stop, operator no need to wait to switch off the machine.
• When job cutting gets over, the machine automatically stops by limit switch.
• So the operator can operate two machines same time.
• It proves time saving and power saving.

• Most of Bandsaw Machine Manufacturer gives hand lifting option in the machine. If there is a need to lift the machine but operator’s hand are not free at that time this hand lifter option becomes useless.
• So to overcome such limitation, but we have used easy foot lifter in our machine.
• With the help of such option, an operator can easily lift the machine with their foot even their hands are not free.
• As this option is operator friendly, operator repetitively suggests us.

• To protects gears from heating and other damages, we have attached one cover box in our machine.
• We have used the net type cover box so that air circulation is there and because of it protects from heating.
• Life of all gears increases because of such cover box.
• This is an extra option in our machine which is not given by other manufacturers.