Lathe Machine Manufacturers
|
|
|
[250 mm] Metal Cutting Bandsaw Machine

[250 mm] Metal Cutting Bandsaw Machine

₹ 1,59,000

  • Model Type: Metal Cutting Bandsaw Machine
  • Category: Metal Cutting Machine / Workshop Machine
  • Colour: White & Black
  • Cutting capacity: 250 mm
  • Blade Size : 3300 x 27 x 0.9 (mm)
  • Electricals: 1.5 HP
  • Cutting Stroke Capacity: Round 250mm, Square 225 x 225, Casting, EN8, WTS Hard materials
Enquiry
     Hydraulic Cylinder:

In Hydraulic Cylinders, we used MS seamless horning pipe that will never damage or break down compared to the aluminum pipe.
  Blade Tension:

The blade can be tensioned and be released manually as per required pressure (level gauge arranged by extra cost Rs.30,000.00). The saw is driven by sufficient drive power to cut material.
Blade Guides:

The guide ensures accurate cutting and long blade life. They are factory sets that consist of spring-loaded, carbide inserts gap allow easy blade changing blades (factory set). Roller bearing and carbide wear pads are provided to guide the blade properly.
Saw Feed:

Saw Feed up and down motion is controlled manually and regulated by a pressure-regulated precise feed control knob.
Job Clamping Vice:

Heavy-duty job clamping vice with heavy-duty vice screw with a center clamping as well both vice’s shaft is grinding by cylindrical grinder for smooth and batter performance with and backless on vice for that Vice securely clamps the workpiece on both sides of the blade thus minimizing and pieces and better job clamping.
Blade Cleaning Brush:

The brush keeps the blade free from chips for smoother cutting and increases the performance/life of the blade.
Machine Operation (manual):

Feeding of job manually clamping de-clamping of job manually & lifting of arm manually.
Swing Action:

To cut large, wide & hardened materials like (WPS, SS, Alloy, High nickel, etc) a special mechanism is fitted in this machine. It will help us to cut faster than any ordinary cut by a manually operated bandsaw machine.
Price 1,15,000 1,59,000 2,06,000 2,39,000 2,69,000
CUTTING CAPACITY MODEL 200 mm 250 mm 300 mm 350 mm 400 mm
Drive motor 1 H.P 1440RPM 1.5 H.P 1440RPM 2 H.P 960RPM 2 H.P 960RPM 2 H.P 960RPM
Coolant pump 0.15 H.P 440 Volts 0.15 H.P 440 Volts 0.15 H.P 440 Volts 0.15 H.P 440 Volts 0.15 H.P 440 Volts
Blade speed 20/35/55/75 20/35/55/75 20/35/55/75 20/35/55/75 20/35/55/75
Blade size in mm 3000 x 27 x 0.9 3300 x 27 x0.9 3760 x 34 x 1.1 4100 x 34 x 1.1 4600 x 34 x 1.1
Floor space LxWxH 1630-750-870 2000-750-950 2400-930-1050 2550-930-1050 3000-930-1400
Net Weight in Kg. 320 395 770 890 1200
Pack Weight in Kg. 430 460 850 970 1310

GUIDELINE FOR GOOD CUTTING EFFICIENCY OF THE MACHINE

For cutting hard & tough materials, blade speed should be lower, for cutting soft materials. Blade speed should be higher. At least 3 consecutive teeth of the blade must always be in contact with the material. (TPI selection) Select proper blade TPI and speed according to the job diameter.

Observe the chips being formed during cutting

  • If power from then insufficient feed (Weight & speed)
  • If heavy blue chips then excessive feed
  • The chips must be in curled like worm-spring
  • Avoid sharp edges & corners at the start-up of cutting
  • Use proper quality and quantity of cutting oil (at least 5 to 10%) in water. (water should be with a lower TDS value)

This is an ideal condition and indicates proper selection of Band speed and cutting feed, don’t stop the machine during the cutting, except for power failure or blade breakage.

  • FREE ACCESSORIES
  • 1 NO. BIMETAL BANDSAW BLADE
  •  V-BELT PULLEYS WITH PULLEYS COVER
  • HIGH-EFFICIENCY POWER TRANSMISSION GEARBOX (WITH OIL)
  • FRICTION TYPE CHIP REMOVING WIRE BRUSH
  • NEW DESIGN HYDRAULIC FEED CONTROL JUMPER (WITH OIL)
  • COLOUR –MAT FINISH SUPER GREY AND DARK GREY
  • COLOUR –MAT FINISH SUPER GREY AND DARK GREY
  • 3 PHASE COOLANT PUMP
  • ELECTRIC CONTROL PANEL WITH COMPLETE ACCESSORIES
  • PUSHBUTTONS
Related Products